Shellfish100 g vs 100 gTwo cited FDC recordsUpdated

Crab: standard vs canned USDA FDC 2706344 vs 2706345

Per 100 g, standard reports 395 mg sodium, while canned reports 563 mg sodium.

The comparison uses two cited USDA records. Their complete source names, household portions, nutrient values, and FoodData Central links remain visible below.

Record A · FDC 2706344

Crab

Check this record in FoodData Central ↗

Record B · FDC 2706345

Crab, canned

Check this record in FoodData Central ↗

Highlighted difference

Sodium at the same 100-gram weight

Bar length shows the two cited values on one shared denominator. It does not rank either food or establish why they differ.

  1. Crab 395 mg
    395 mg
  2. Crab, canned 563 mg
    563 mg

Shared basis: 100 g · mg

Equal-weight evidence

Nutrition per 100 grams

Both columns use the same mass, which compares nutrient concentration without allowing the two representative source amounts to change the denominator. “A +” or “B +” reports the arithmetic difference between the cited values; it is not a quality score.

On smaller screens, focus a comparison table and scroll horizontally to read every column.

Per-100-gram nutrient comparison for Crab and Crab, canned
NutrientA · CrabB · Crab, cannedDifference
Calories 83 kcal 83 kcal Same reported value
Protein 17.9 g 17.9 g Same reported value
Total fat 0.7 g 0.7 g Same reported value
Carbohydrate 0 g 0 g Same reported value
Dietary fiber 0 g 0 g Same reported value
Total sugars 0 g 0 g Same reported value
SodiumMaterial difference 395 mg 563 mg B +168 mg
Saturated fat 0.2 g 0.2 g Same reported value
Potassium 259 mg 259 mg Same reported value
Calcium 91 mg 91 mg Same reported value
Iron 0.5 mg 0.5 mg Same reported value

Values come from the two cited USDA FoodData Central Survey Foods records. Feast does not average records, impute missing values, or infer a nutrient from the food name.

Read the table by question

Every material primary-nutrient difference on this page is numerically higher in B (1 of 1).

These answers describe concentration per 100 grams. “More” and “less” identify the arithmetic direction only; they do not decide which record is a better match or which food is better for a person.

Which reports fewer calories?

Same reported value

Both records report 83 kcal of calories per 100 g.

Which reports more protein?

Same reported value

Both records report 17.9 g of protein per 100 g.

Which reports more fiber?

Same reported value

Both records report 0 g of fiber per 100 g.

Which reports less sodium?

Record A

Record A reports 395 mg, compared with 563 mg in the other record—a difference of 168 mg.

What differs in the source descriptions

The exact names carry information the numbers cannot.

USDA assigns both records to “Shellfish,” but the topic label is broad. Record A is “Crab.” Record B is “Crab, canned.” Feast paired them because their contrast-neutral food identities are an exact match, not merely because they share a generic category.

The controlled name parser found 1 interpretable distinction. These labels organize wording already present in the names; they do not establish that a distinction caused a nutrient difference.

Controlled wording distinctions
Description dimensionRecord ARecord B
Source formNo matching controlled term in the source namecanned

Even a clean name contrast can carry hidden companions. A fried record may also include coating; a restaurant record can use a different recipe; a reduced-sodium description can differ in more than salt; and a source amount can reflect a different reporting convention. That is why this page reports the complete pair rather than treating one word as an intervention.

Portion context

A representative source amount is not a shared “serving.”

Record A uses USDA reference amount at 85 g. Record B uses USDA reference amount at 85 g. Those labels and gram weights come from their respective records. They are useful for scaling the chosen profile, but they are not recommendations and need not describe equal amounts.

The representative amounts do not cross Feast’s material portion-difference threshold of both 15 grams and 20%. They are still separate source measures, so the 100-gram table remains the appropriate place for an equal-weight comparison.

A cup, piece, slice, sandwich, fillet, or fluid ounce can have different gram weights across records. A matching label is not enough: check the listed grams. If accuracy matters more than convenience, weighing the food or using a current package label can be more specific than a generic survey-food measure.

Record A measures

  • 1 crab40 g
  • 1 leg15 g
  • 1 claw15 g
  • 1 cup135 g
  • USDA reference amount85 g
Scale record A →

Record B measures

  • 1 cup135 g
  • 1 small can60 g
  • 1 standard can120 g
  • 1 large can450 g
  • USDA reference amount85 g
Scale record B →

One shared household label

1 cup: 135 g in A vs 135 g in B

Here the household label and listed gram weight match at displayed precision, so this particular table is also an equal-mass comparison. The values remain specific to these two source records, not a universal weight for every 1 cup.

Nutrition for one 1 cup using each record’s own source gram weight
NutrientA · 135 gB · 135 g
Calories112 kcal112 kcal
Protein24.2 g24.2 g
Dietary fiber0 g0 g
Sodium533 mg760 mg

USDA source formulation evidence

The listed inputs provide another way to audit the match.

FNDDS includes input-food rows behind each standardized survey-food record. Record A’s leading listed inputs include Crustaceans, crab, blue, cooked, moist heat. Record B’s include Crustaceans, crab, blue, canned. Ingredient-code overlap is 0%, and normalized listed-input-weight variation is 100%.

0 shared coded inputs

The two listed formulations do not share an ingredient code in this source extract. Shared codes can still carry different listed weights.

1 A-only and 1 B-only coded inputs

A-only entries include Crustaceans, crab, blue, cooked, moist heat. B-only entries include Crustaceans, crab, blue, canned.

Important: repeated rows carrying the same ingredient code are combined before the shares and overlap are calculated. These weights belong to USDA’s source formulation: they are not a reconstructed plate, final cooked yield, visitor serving, ingredient declaration, or estimate of what is visible in a photo. USDA’s FNDDS documentation explains that these calculation recipes can represent multiple variants, may include retention or moisture adjustments, and are not product-label ingredient lists.

Choosing the closer record

Match context first; scale second.

  1. 01

    Read both names literally

    Compare cooking method, coating, edible skin or peel, sauce, additions, venue, source form, and food subtype. For this pair, the full A and B descriptions above are the evidence—not shortened search labels.

  2. 02

    Use listed inputs as a check

    If the name still leaves ambiguity, compare the leading and unique source inputs. They can reveal that two near names refer to meaningfully different standardized formulations, but they do not reconstruct your dish.

  3. 03

    Choose an amount for that record

    After choosing A or B, use its own named measure and gram weight. Do not transfer a cup, slice, or “typical amount” from the other record as if the measures were interchangeable.

  4. 04

    Account for missing details

    Brand, current restaurant recipe, cooking oil, drained weight, toppings, substitutions, and unfinished portions may not be captured. A label or weighed recipe can supersede a generic reference when it better matches the actual food.

Limits and responsible interpretation

This is a comparison of records, not a causal study.

The two records come from 2021–2023 FoodData Central Survey Foods data. The nutrient table faithfully compares their published values on the same weight basis. It does not measure two plates prepared at the same time, isolate one ingredient, or estimate the uncertainty around either value.

For this pair, the source names differ across 1 documented description dimension, while the listed formulations show 0% ingredient-code overlap and 100% normalized listed-weight variation. Moisture, ingredient proportions, preparation, and record construction can therefore move together. The page can describe the combined record difference; it cannot isolate the effect of one word.

A higher or lower number is not an overall verdict. Protein, fiber, sodium, energy, fat, micronutrients, preferences, allergies, budget, portion, and an individual’s goals answer different questions. Feast therefore reports directions and magnitudes without applying a universal “healthier” label.

This page is educational and does not diagnose a condition, prescribe a target, or replace advice from a qualified professional. For an allergy, medically directed diet, or strict ingredient limit, use verified ingredient information and guidance appropriate to that situation.

How this page qualified

A page is published only when the pair clears materiality and diversity gates.

Both records must occupy the same USDA survey-food topic and share a close food identity after a controlled vocabulary separates preparation, edible-part, source, claim, crust, and sauce wording. Exact contrast-neutral identities receive priority. Close ingredient or form substitutions can qualify when name overlap remains high and the numerical evidence is material.

For primary nutrients, Feast requires both an absolute and relative difference: at least 20 kcal and 12% for energy; 2 g and 18% for protein or fat; 5 g and 15% for carbohydrate; 1 g and 20% for fiber; 4 g and 20% for sugars; or 100 mg and 20% for sodium. A focused one-nutrient pair also needs a material representative-amount or formulation distinction. Rounding-only pairs are not published.

Unordered FDC IDs define a canonical pair, so reversing A and B cannot create another page. Each source record can appear twice at most, each USDA topic contributes no more than 40 pages, and closely repeated identity families are capped. Those rules produced a selective comparison library rather than every mathematical combination in the corpus.

Read the complete nutrition-page methodology for import, nutrient mapping, portion scaling, Daily Value, and uncertainty rules.

Decision support from the exact records on this page

Turn source data into a better next decision

These conclusions and reading paths are computed from 2 exact records behind Crab versus Crab, canned. Links are chosen by record identity, controlled contrast, formulation input, nutrient spread, or serving context—not by loose keyword similarity.

Equal-weight result

Crab, canned is higher in sodium per 100 g

Crab, canned reports 563 mg versus 395 mg for Crab: a 168 mg difference when both are normalized to 100 g.

Inspect the underlying evidence

These listed servings have equal weights

2 listed servings each weigh 85 g

The 2 records with a listed serving weight on this page each use 85 g. Their serving totals therefore compare equal weights, even if the household labels differ. Match the preparation and adjust the weight to the amount you eat.

Record identity is part of the estimate

Distinguish “Crab” from “Crab, canned”

These are separate USDA records with separate formulations or survey descriptions. Match preparation, additions, and the named household amount before borrowing either record’s nutrients.

Inspect the underlying evidence

Contextual knowledge graph

Follow the relationship that matches your question

For Crab versus Crab, canned, each path states why the destination belongs here, so you can distinguish a true evidentiary connection from a merely similar label.

Best next guide for this exact record Crab

Crab and Crab, canned are explicitly linked in this guide, which separates direct name matches from contextual variants.

Follow this evidence path
Put the observed spread in corpus context Sodium: density and serving context

In this page’s records, sodium runs from 395 mg in Crab to 563 mg in Crab, canned, all per 100 g.

Follow this evidence path
A formulation detail that separates records Crustaceans, crab, blue, canned

USDA input 15141 appears in 1 of 2 context records; its summed listed input weight spans 100–100 g across those source formulations. These are source-formulation input weights, not plated or serving weights. Follow the code to inspect every represented occurrence.

Follow this evidence path
A formulation detail that separates records Crustaceans, crab, blue, cooked, moist heat

USDA input 15140 appears in 1 of 2 context records; its summed listed input weight spans 100–100 g across those source formulations. These are source-formulation input weights, not plated or serving weights. Follow the code to inspect every represented occurrence.

Follow this evidence path
2 context records in this source topic Shellfish

Crab and Crab, canned belong to this USDA source-category collection. Its displayed ranges and complete exact-record catalog provide the peer set for a manual comparison; the destination does not preselect this page’s record.

Follow this evidence path
Inspect an exact record Crab

Open the full nutrient table, household measures, formulation inputs, and FoodData Central 2706344 citation for this exact record—not a name-level average.

Follow this evidence path
Check another exact record Crab, canned

Open the full nutrient table, household measures, formulation inputs, and FoodData Central 2706345 citation for this exact record—not a name-level average.

Follow this evidence path