Crackers, excludes saltines100 g vs 100 gTwo cited FDC recordsUpdated

Crackers, sandwich: regular vs reduced fat USDA FDC 2708172 vs 2708174

Per 100 g, regular reports 24.5 g total fat, while reduced fat reports 16.7 g total fat.

The comparison uses two cited USDA records. Their complete source names, household portions, nutrient values, and FoodData Central links remain visible below.

Record A · FDC 2708172

Crackers, sandwich, peanut butter filled

Check this record in FoodData Central ↗

Record B · FDC 2708174

Crackers, sandwich, reduced fat, peanut butter filled

Check this record in FoodData Central ↗

Highlighted difference

Protein at the same 100-gram weight

Bar length shows the two cited values on one shared denominator. It does not rank either food or establish why they differ.

  1. 11.5 g
  2. 8.3 g

Shared basis: 100 g · g

Equal-weight evidence

Nutrition per 100 grams

Both columns use the same mass, which compares nutrient concentration without allowing the two representative source amounts to change the denominator. “A +” or “B +” reports the arithmetic difference between the cited values; it is not a quality score.

On smaller screens, focus a comparison table and scroll horizontally to read every column.

Per-100-gram nutrient comparison for Crackers, sandwich, peanut butter filled and Crackers, sandwich, reduced fat, peanut butter filled
NutrientA · Crackers, sandwich, peanut butter filledB · Crackers, sandwich, reduced fat, peanut…Difference
Calories 494 kcal 437 kcal A +57 kcal
ProteinMaterial difference 11.5 g 8.3 g A +3.2 g
Total fatMaterial difference 24.5 g 16.7 g A +7.8 g
Carbohydrate 58.4 g 63.5 g B +5.1 g
Dietary fiber 2.3 g 2.8 g B +0.5 g
Total sugars 10.5 g 11.1 g B +0.6 g
SodiumMaterial difference 801 mg 639 mg A +162 mg
Saturated fatMaterial difference 4.8 g 2.8 g A +2 g
Potassium 215 mg 122 mg A +93 mg
Calcium 81 mg 0 mg A +81 mg
Iron 2.8 mg 3 mg B +0.2 mg

Values come from the two cited USDA FoodData Central Survey Foods records. Feast does not average records, impute missing values, or infer a nutrient from the food name.

Read the table by question

Every material primary-nutrient difference on this page is numerically higher in A (3 of 3).

These answers describe concentration per 100 grams. “More” and “less” identify the arithmetic direction only; they do not decide which record is a better match or which food is better for a person.

Which reports fewer calories?

Record B

Record B reports 437 kcal, compared with 494 kcal in the other record—a difference of 57 kcal.

Which reports more protein?

Record A

Record A reports 11.5 g, compared with 8.3 g in the other record—a difference of 3.2 g.

Which reports more fiber?

Record B

Record B reports 2.8 g, compared with 2.3 g in the other record—a difference of 0.5 g.

Which reports less sodium?

Record B

Record B reports 639 mg, compared with 801 mg in the other record—a difference of 162 mg.

What differs in the source descriptions

The exact names carry information the numbers cannot.

USDA assigns both records to “Crackers, excludes saltines,” but the topic label is broad. Record A is “Crackers, sandwich, peanut butter filled.” Record B is “Crackers, sandwich, reduced fat, peanut butter filled.” Feast paired them because their contrast-neutral food identities are an exact match, not merely because they share a generic category.

The controlled name parser found 1 interpretable distinction. These labels organize wording already present in the names; they do not establish that a distinction caused a nutrient difference.

Controlled wording distinctions
Description dimensionRecord ARecord B
Fat-level wordingNo matching controlled term in the source namereduced-fat wording

Even a clean name contrast can carry hidden companions. A fried record may also include coating; a restaurant record can use a different recipe; a reduced-sodium description can differ in more than salt; and a source amount can reflect a different reporting convention. That is why this page reports the complete pair rather than treating one word as an intervention.

Portion context

A representative source amount is not a shared “serving.”

Record A uses USDA reference amount at 18 g. Record B uses USDA reference amount at 18 g. Those labels and gram weights come from their respective records. They are useful for scaling the chosen profile, but they are not recommendations and need not describe equal amounts.

The representative amounts do not cross Feast’s material portion-difference threshold of both 15 grams and 20%. They are still separate source measures, so the 100-gram table remains the appropriate place for an equal-weight comparison.

A cup, piece, slice, sandwich, fillet, or fluid ounce can have different gram weights across records. A matching label is not enough: check the listed grams. If accuracy matters more than convenience, weighing the food or using a current package label can be more specific than a generic survey-food measure.

Record A measures

  • 1 sandwich7 g
  • 1 miniature/bite size3 g
  • 1 individual package45 g
  • 1 cup, NFS70 g
  • USDA reference amount18 g
Scale record A →

Record B measures

  • 1 sandwich7 g
  • 1 miniature/bite size3 g
  • 1 individual package45 g
  • 1 cup, NFS70 g
  • USDA reference amount18 g
Scale record B →

One shared household label

1 sandwich: 7 g in A vs 7 g in B

Here the household label and listed gram weight match at displayed precision, so this particular table is also an equal-mass comparison. The values remain specific to these two source records, not a universal weight for every 1 sandwich.

Nutrition for one 1 sandwich using each record’s own source gram weight
NutrientA · 7 gB · 7 g
Calories35 kcal31 kcal
Protein0.8 g0.6 g
Dietary fiber0.2 g0.2 g
Sodium56 mg45 mg

USDA source formulation evidence

The listed inputs provide another way to audit the match.

FNDDS includes input-food rows behind each standardized survey-food record. Record A’s leading listed inputs include Crackers, standard snack-type, sandwich, with peanut butter filling. Record B’s include Crackers, sandwich-type, peanut butter filled, reduced fat. Ingredient-code overlap is 0%, and normalized listed-input-weight variation is 100%.

Record A · 1 coded input

Crackers, sandwich, peanut butter filled

  1. Crackers, standard snack-type, sandwich, with peanut butter fillingIngredient code 18231
    100% of listed input weight

0 shared coded inputs

The two listed formulations do not share an ingredient code in this source extract. Shared codes can still carry different listed weights.

1 A-only and 1 B-only coded inputs

A-only entries include Crackers, standard snack-type, sandwich, with peanut butter filling. B-only entries include Crackers, sandwich-type, peanut butter filled, reduced fat.

Important: repeated rows carrying the same ingredient code are combined before the shares and overlap are calculated. These weights belong to USDA’s source formulation: they are not a reconstructed plate, final cooked yield, visitor serving, ingredient declaration, or estimate of what is visible in a photo. USDA’s FNDDS documentation explains that these calculation recipes can represent multiple variants, may include retention or moisture adjustments, and are not product-label ingredient lists.

USDA shorthand in this evidence
  • NFS means “not further specified.” The record intentionally leaves the exact subtype, size, or preparation unresolved.

Choosing the closer record

Match context first; scale second.

  1. 01

    Read both names literally

    Compare cooking method, coating, edible skin or peel, sauce, additions, venue, source form, and food subtype. For this pair, the full A and B descriptions above are the evidence—not shortened search labels.

  2. 02

    Use listed inputs as a check

    If the name still leaves ambiguity, compare the leading and unique source inputs. They can reveal that two near names refer to meaningfully different standardized formulations, but they do not reconstruct your dish.

  3. 03

    Choose an amount for that record

    After choosing A or B, use its own named measure and gram weight. Do not transfer a cup, slice, or “typical amount” from the other record as if the measures were interchangeable.

  4. 04

    Account for missing details

    Brand, current restaurant recipe, cooking oil, drained weight, toppings, substitutions, and unfinished portions may not be captured. A label or weighed recipe can supersede a generic reference when it better matches the actual food.

Limits and responsible interpretation

This is a comparison of records, not a causal study.

The two records come from 2021–2023 FoodData Central Survey Foods data. The nutrient table faithfully compares their published values on the same weight basis. It does not measure two plates prepared at the same time, isolate one ingredient, or estimate the uncertainty around either value.

For this pair, the source names differ across 1 documented description dimension, while the listed formulations show 0% ingredient-code overlap and 100% normalized listed-weight variation. Moisture, ingredient proportions, preparation, and record construction can therefore move together. The page can describe the combined record difference; it cannot isolate the effect of one word.

A higher or lower number is not an overall verdict. Protein, fiber, sodium, energy, fat, micronutrients, preferences, allergies, budget, portion, and an individual’s goals answer different questions. Feast therefore reports directions and magnitudes without applying a universal “healthier” label.

This page is educational and does not diagnose a condition, prescribe a target, or replace advice from a qualified professional. For an allergy, medically directed diet, or strict ingredient limit, use verified ingredient information and guidance appropriate to that situation.

How this page qualified

A page is published only when the pair clears materiality and diversity gates.

Both records must occupy the same USDA survey-food topic and share a close food identity after a controlled vocabulary separates preparation, edible-part, source, claim, crust, and sauce wording. Exact contrast-neutral identities receive priority. Close ingredient or form substitutions can qualify when name overlap remains high and the numerical evidence is material.

For primary nutrients, Feast requires both an absolute and relative difference: at least 20 kcal and 12% for energy; 2 g and 18% for protein or fat; 5 g and 15% for carbohydrate; 1 g and 20% for fiber; 4 g and 20% for sugars; or 100 mg and 20% for sodium. A focused one-nutrient pair also needs a material representative-amount or formulation distinction. Rounding-only pairs are not published.

Unordered FDC IDs define a canonical pair, so reversing A and B cannot create another page. Each source record can appear twice at most, each USDA topic contributes no more than 40 pages, and closely repeated identity families are capped. Those rules produced a selective comparison library rather than every mathematical combination in the corpus.

Read the complete nutrition-page methodology for import, nutrient mapping, portion scaling, Daily Value, and uncertainty rules.

Decision support from the exact records on this page

Turn source data into a better next decision

These conclusions and reading paths are computed from 2 exact records behind Crackers, sandwich, peanut butter filled versus Crackers, sandwich, reduced fat, peanut butter filled. Links are chosen by record identity, controlled contrast, formulation input, nutrient spread, or serving context—not by loose keyword similarity.

Equal-weight result

Crackers, sandwich, peanut butter filled is higher in protein per 100 g

Crackers, sandwich, peanut butter filled reports 11.5 g versus 8.3 g for Crackers, sandwich, reduced fat, peanut butter filled: a 3.2 g difference when both are normalized to 100 g.

Inspect the underlying evidence

These listed servings have equal weights

2 listed servings each weigh 18 g

The 2 records with a listed serving weight on this page each use 18 g. Their serving totals therefore compare equal weights, even if the household labels differ. Match the preparation and adjust the weight to the amount you eat.

Record identity is part of the estimate

Distinguish “Crackers, sandwich, peanut butter filled” from “Crackers, sandwich, reduced fat, peanut butter filled”

These are separate USDA records with separate formulations or survey descriptions. Match preparation, additions, and the named household amount before borrowing either record’s nutrients.

Inspect the underlying evidence

Contextual knowledge graph

Follow the relationship that matches your question

For Crackers, sandwich, peanut butter filled versus Crackers, sandwich, reduced fat, peanut butter filled, each path states why the destination belongs here, so you can distinguish a true evidentiary connection from a merely similar label.

Best next guide for this exact record Crackers, sandwich

Crackers, sandwich, peanut butter filled and Crackers, sandwich, reduced fat, peanut butter filled are explicitly linked in this guide, which separates direct name matches from contextual variants.

Follow this evidence path
Put the observed spread in corpus context Protein: density and serving context

In this page’s records, protein runs from 8.3 g in Crackers, sandwich, reduced fat, peanut butter filled to 11.5 g in Crackers, sandwich, peanut butter filled, all per 100 g.

Follow this evidence path
2 exact records carried forward Crackers

Crackers, sandwich, peanut butter filled and Crackers, sandwich, reduced fat, peanut butter filled are explicitly linked in this guide, which separates direct name matches from contextual variants.

Follow this evidence path
Test a nearby record choice Crackers, sandwich, reduced fat, peanut butter filled vs Crackers, whole grain, sandwich, peanut butter filled

Crackers, sandwich, reduced fat, peanut butter filled is held as one side of the comparison. The explicit record-description contrast is Fat-level wording: reduced-fat wording versus No matching controlled term in the source name; it is a selection cue, not evidence of cause.

Follow this evidence path
A formulation detail that separates records Crackers, sandwich-type, peanut butter filled, reduced fat

USDA input 28314 appears in 1 of 2 context records; its summed listed input weight spans 100–100 g across those source formulations. These are source-formulation input weights, not plated or serving weights. Follow the code to inspect every represented occurrence.

Follow this evidence path
Test a nearby record choice Crackers, sandwich, peanut butter filled vs Crackers, whole grain, sandwich, peanut butter filled

Crackers, sandwich, peanut butter filled is held as one side of the comparison. The explicit record-description contrast is Grain wording: No matching controlled term in the source name versus whole-grain or whole-wheat wording; it is a selection cue, not evidence of cause.

Follow this evidence path
Put the observed spread in corpus context Calcium: density and serving context

In this page’s records, calcium runs from 0 mg in Crackers, sandwich, reduced fat, peanut butter filled to 81 mg in Crackers, sandwich, peanut butter filled, all per 100 g.

Follow this evidence path