Typical listed-weight range
29.8%–99.2%
The middle half of linked records spans 69.4 percentage points from the 25th to the 75th percentile. This is more resistant to a single extreme record than the full minimum-to-maximum range.
Within Feast’s 3,850-record USDA FNDDS reference corpus, “Beef, loin, top loin, all grades, grilled” appears as a formulation input in 5 finished-food records. Their calories and nutrients describe those complete foods, not the input label by itself. Use the catalog to choose the closest finished food and open its exact FoodData Central citation.
Browse all 5 linked food records →This page helps you find complete foods that include Beef, loin, top loin, all grades, grilled in USDA’s nutrition data. Choose the record that most closely matches what you ate; Feast does not turn a collection average into a standalone ingredient estimate.
What the code means
Every occurrence collected here uses ingredient code 13910 and the source description “Beef, loin, top loin, separable lean and fat, trimmed to 1/8" fat, all grades, cooked, grilled.” The code is preserved exactly as it appears in the FNDDS input-food rows. It is not a FoodData Central FDC ID, so this page does not invent a standalone ingredient-record URL.
The strongest concentrations of linked records are currently Beef, excludes ground (5). These are category counts within Feast’s selected 3,850-record corpus. They do not estimate how often the ingredient is eaten, how common it is in recipes generally, or its prevalence across every FNDDS release.
Collection-level interpretation
These summaries describe the linked FNDDS records in this exact corpus. They do not estimate consumer frequency, market share, or the composition of a meal. This is a very small set of 5 records: each observation can move the percentages, buckets, and interpolated quartiles substantially, so read the complete catalog rather than treating the summaries as stable population estimates.
Typical listed-weight range
The middle half of linked records spans 69.4 percentage points from the 25th to the 75th percentile. This is more resistant to a single extreme record than the full minimum-to-maximum range.
Largest linked category
5 of 5 linked records (100%) sit in this USDA category. The remainder span 0 other categories.
Most populated share band
3 records (60%) fall in this band after repeated rows for code 13910 are combined within each food.
Most frequent eligible co-input
It appears alongside code 13910 in 5 linked records (100%). Co-occurrence describes database structure, not a required recipe.
Where USDA uses this input
Each record is counted once even if ingredient code 13910 appears on more than one input row inside that formulation. The category grouping describes the complete linked foods, not a culinary rule about the ingredient.
Beef, steak, country fried; Beef, steak, strip, lean and fat eaten; Beef, steak, sirloin, lean and fat eaten
Important nutrition boundary
No unique exact food-code match or reviewed sole-source bridge qualifies for a direct consumer answer. Feast therefore does not treat the collection median, minimum, maximum, or an arbitrary similar record as the nutrition of this input.
The table below describes the complete linked foods per 100 grams. Use it to find a closer finished-food record, not to infer what this formulation input supplies on its own.
Compare complete food records
Every value in this table describes an entire USDA survey-food record per 100 grams. The values are not the nutrient content of ingredient code 13910, and differences cannot be attributed to this one input.
| Whole-record nutrient | Observed minimum | Middle 50% | Median | Observed maximum | Linked records |
|---|---|---|---|---|---|
| Caloriesper 100 g of the complete food | 216 kcal | 216–262 kcal | 262 kcal | 306 kcal | 5 |
| Proteinper 100 g of the complete food | 19.9 g | 26.2–28 g | 26.2 g | 28 g | 5 |
| Carbohydrateper 100 g of the complete food | 0 g | 0–0 g | 0 g | 7.9 g | 5 |
| Total fatper 100 g of the complete food | 11.3 g | 11.3–16.6 g | 16.6 g | 21 g | 5 |
| Dietary fiberper 100 g of the complete food | 0 g | 0–0 g | 0 g | 0.3 g | 5 |
| Sodiumper 100 g of the complete food | 361 mg | 361–361 mg | 361 mg | 432 mg | 5 |
The minimum and maximum preserve the complete observed span. The median is the middle linked-record value, not a prediction for a meal and not an ingredient-specific nutrient estimate.
Complete linked catalog
This is the complete qualifying-corpus catalog, not a hand-picked sample. Search by food name or USDA category, then open a profile for household portions, Feast’s 21-nutrient panel, formulation details, and its exact FDC citation.
5 records shown
| Linked USDA food record | USDA category | Formulation | Listed input weight | Weight share | Calories | Protein | Sodium | Citation |
|---|---|---|---|---|---|---|---|---|
| Beef, steak, country fried | Beef, excludes ground | 4 input rows | 71 g | 70.4% | 306 kcal | 19.9 g | 432 mg | FDC 2705842 ↗ |
| Beef, steak, sirloin, lean and fat eaten | Beef, excludes ground | 2 input rows | 100 g | 99.2% | 262 kcal | 26.2 g | 361 mg | FDC 2705833 ↗ |
| Beef, steak, sirloin, lean only eaten | Beef, excludes ground | 3 input rows | 30 g | 29.8% | 216 kcal | 28 g | 361 mg | FDC 2705834 ↗ |
| Beef, steak, strip, lean and fat eaten | Beef, excludes ground | 2 input rows | 100 g | 99.2% | 262 kcal | 26.2 g | 361 mg | FDC 2705836 ↗ |
| Beef, steak, strip, lean only eaten | Beef, excludes ground | 3 input rows | 30 g | 29.8% | 216 kcal | 28 g | 361 mg | FDC 2705837 ↗ |
No linked record matches that filter. Clear the search to restore the complete catalog.
Decision support from the exact records on this page
These conclusions and reading paths are computed from 5 exact records behind Beef, loin, top loin, separable lean and fat, trimmed to 1/8" fat, all grades, cooked, grilled (USDA input 13910). Links are chosen by record identity, controlled contrast, formulation input, nutrient spread, or serving context—not by loose keyword similarity.
Equal-weight result
Beef, steak, country fried reports 7.9 g versus 0 g for Beef, steak, sirloin, lean and fat eaten: a 7.9 g difference when both are normalized to 100 g.
Inspect the underlying evidenceThe denominator changes the answer
Beef, steak, country fried reports 306 kcal per 100 g and 490 kcal in USDA source amount (160 g). Beef, steak, strip, lean and fat eaten reports a lower 262 kcal per 100 g but a higher 629 kcal in USDA source amount (240 g).
Choose the record before reading the number
The page keeps both records at the same 100 g denominator and makes Edible fat wording (lean and fat eaten versus lean only eaten) the explicit record-description contrast. It does not show that the wording difference caused a nutrient difference. Pick the description that matches the food in front of you rather than averaging away the distinction.
Inspect the underlying evidenceContextual knowledge graph
For Beef, loin, top loin, separable lean and fat, trimmed to 1/8" fat, all grades, cooked, grilled (USDA input 13910), each path states why the destination belongs here, so you can distinguish a true evidentiary connection from a merely similar label.
Beef, steak, country fried and Beef, steak, sirloin, lean and fat eaten are explicitly linked in this guide, which separates direct name matches from contextual variants.
Follow this evidence path Compare two records on this page Beef, steak, sirloin, lean and fat eaten vs Beef, steak, sirloin, lean only eatenBoth records appear in this page’s evidence set. The explicit record-description contrast is Edible fat wording: lean and fat eaten versus lean only eaten; it is a selection cue, not evidence of cause.
Follow this evidence path Compare two records on this page Beef, steak, strip, lean and fat eaten vs Beef, steak, strip, lean only eatenBoth records appear in this page’s evidence set. The explicit record-description contrast is Edible fat wording: lean and fat eaten versus lean only eaten; it is a selection cue, not evidence of cause.
Follow this evidence path 5 exact records carried forward BeefBeef, steak, country fried and Beef, steak, sirloin, lean and fat eaten are explicitly linked in this guide, which separates direct name matches from contextual variants.
Follow this evidence path 5 context records in this source topic Beef, excludes groundBeef, steak, country fried and Beef, steak, sirloin, lean and fat eaten belong to this USDA source-category collection. Its displayed ranges and complete exact-record catalog provide the peer set for a manual comparison; the destination does not preselect this page’s record.
Follow this evidence path A formulation detail that separates records Beef, loin, top loin steak, boneless, lip-on, separable lean only, trimmed to 1/8" fat, all grades, cooked, grilledUSDA input 23394 appears in 2 of 5 context records; its summed listed input weight spans 70–70 g across those source formulations. These are source-formulation input weights, not plated or serving weights. Follow the code to inspect every represented occurrence.
Follow this evidence path A formulation detail that separates records Breading or batter as ingredient in foodUSDA input 99995000 appears in 1 of 5 context records; its summed listed input weight spans 20–20 g across those source formulations. These are source-formulation input weights, not plated or serving weights. Follow the code to inspect every represented occurrence.
Follow this evidence pathMethod and provenance
Feast begins with its pinned 3,850-record USDA FoodData Central Survey Foods reference corpus for FNDDS 2021–2023. Each exact food profile retains its FDC identifier, source-food description, nutrient values, household measures, and positive-weight input-food rows. This page groups those input rows by the exact ingredient code 13910; it does not merge similar-looking ingredient names or infer synonyms.
The distinct-record count deduplicates by FDC food record. When the same code is listed more than once inside one source formulation, its input weights are added before the listed-weight share is calculated. Category counts also count each food once. The 25th percentile, median, and 75th percentile use the sorted one-share-per-food values with linear interpolation between adjacent ranks when a percentile falls between two records.
USDA’s current FNDDS documentation explains that many nutrient profiles are generated with calculation recipes designed to represent multiple variants, and that their input codes are not necessarily the exact ingredients in a retail product or an ingredient declaration. It also documents moisture and nutrient-retention adjustments. Feast therefore treats these rows as transparent source-calculation evidence—not as a reverse-engineered recipe.
The complete-food nutrient table uses each linked record’s available published per-100-gram values so the denominator remains consistent; its middle-50% ranges use the same interpolated percentile method. It is presented for record selection and comparison only. No nutrient value is reassigned to the ingredient, no causal effect is inferred, and no “healthy” score is manufactured from the collection.
Use the ingredient as a discovery clue. Compare the linked record names, food categories, preparation wording, source formulation, and portion measures. If a close record exists, its complete profile can provide a defensible reference estimate. If the meal differs materially in cooking fat, sauce, ingredient ratios, or portion size, keep looking or use recipe weights, a package label, or an editable photo estimate instead.
These pages are educational source indexes. They do not provide medical advice, personalized nutrient targets, food-safety guidance, or a recipe. If a clinician has given you individualized dietary instructions, follow that guidance and use the most specific current source available for the food you actually consumed.