Fish100 g vs 100 gTwo cited FDC records

Fish, catfish, fried vs Fish, catfish, grilledUSDA FDC 2706238 vs 2706236

A controlled equal-weight comparison of two exact USDA survey-food records, with source descriptions, representative amounts, listed formulation inputs, and interpretation limits kept visible.

Record A · FDC 2706238

Fish, catfish, fried

Check this record in FoodData Central ↗

Record B · FDC 2706236

Fish, catfish, grilled

Check this record in FoodData Central ↗

Equal-weight evidence

Nutrition per 100 grams

Both columns use the same mass, which compares nutrient concentration without allowing the two representative source amounts to change the denominator. “A +” or “B +” reports the arithmetic difference between the cited values; it is not a quality score.

Per-100-gram nutrient comparison for Fish, catfish, fried and Fish, catfish, grilled
NutrientA · Fish, catfish, friedB · Fish, catfish, grilledDifference
CaloriesMaterial under the publication gate 255 kcal 171 kcal A +84 kcal
ProteinMaterial under the publication gate 13.5 g 19.3 g B +5.8 g
Total fatMaterial under the publication gate 16.7 g 9.8 g A +6.9 g
CarbohydrateMaterial under the publication gate 11.7 g 0 g A +11.7 g
Dietary fiber 0.5 g 0 g A +0.5 g
Total sugars 0.2 g 0 g A +0.2 g
Sodium 418 mg 332 mg A +86 mg
Saturated fat 2.7 g 2.3 g A +0.4 g
PotassiumMaterial under the publication gate 254 mg 383 mg B +129 mg
Calcium 21 mg 11 mg A +10 mg
Iron 1.1 mg 0.3 mg A +0.8 mg

Values come from the two cited USDA FoodData Central Survey Foods records. Feast does not average records, impute missing values, or infer a nutrient from the food name.

Calories difference

84 kcal per 100 g

Fish, catfish, fried reports 84 kcal more calories per 100 grams than Fish, catfish, grilled (255 versus 171 kcal).

The absolute difference is 33% of the larger reported value. That percentage describes these two records only; it is not an estimate of biological effect or expected variation.

Protein difference

5.8 g per 100 g

Fish, catfish, grilled reports 5.8 g more protein per 100 grams than Fish, catfish, fried (19.3 versus 13.5 g).

The absolute difference is 30% of the larger reported value. That percentage describes these two records only; it is not an estimate of biological effect or expected variation.

Total fat difference

6.9 g per 100 g

Fish, catfish, fried reports 6.9 g more total fat per 100 grams than Fish, catfish, grilled (16.7 versus 9.8 g).

The absolute difference is 41% of the larger reported value. That percentage describes these two records only; it is not an estimate of biological effect or expected variation.

Carbohydrate difference

11.7 g per 100 g

Fish, catfish, fried reports 11.7 g more carbohydrate per 100 grams than Fish, catfish, grilled (11.7 versus 0 g).

The absolute difference is 100% of the larger reported value. That percentage describes these two records only; it is not an estimate of biological effect or expected variation.

What differs in the source descriptions

The exact names carry information the numbers cannot.

USDA assigns both records to “Fish,” but the topic label is broad. Record A is “Fish, catfish, fried.” Record B is “Fish, catfish, grilled.” Feast paired them because their contrast-neutral food identities are an exact match, not merely because they share a generic category.

The controlled name parser found 1 interpretable distinction. These labels organize wording already present in the names; they do not establish that a distinction caused a nutrient difference.

Controlled wording distinctions
Description dimensionRecord ARecord B
Preparation wordingfriedgrilled

Even a clean name contrast can carry hidden companions. A fried record may also include coating; a restaurant record can use a different recipe; a reduced-sodium description can differ in more than salt; and a source amount can reflect a different reporting convention. That is why this page reports the complete pair rather than treating one word as an intervention.

Portion context

A representative source amount is not a shared “serving.”

Record A uses Typical reported amount at 90 g. Record B uses Typical reported amount at 90 g. Those labels and gram weights come from their respective records. They are useful for scaling the chosen profile, but they are not recommendations and need not describe equal amounts.

The representative amounts do not cross Feast’s material portion-difference threshold of both 15 grams and 20%. They are still separate source measures, so the 100-gram table remains the appropriate place for an equal-weight comparison.

A cup, piece, slice, sandwich, fillet, or fluid ounce can have different gram weights across records. A matching label is not enough: check the listed grams. If accuracy matters more than convenience, weighing the food or using a current package label can be more specific than a generic survey-food measure.

Record A measures

  • 1 small/regular fillet90 g
  • 1 large fillet135 g
  • 1 whole fish, any size270 g
  • 1 cup135 g
  • 1 oz yields20 g
  • 1 cubic inch17 g
  • Quantity not specified90 g
Scale record A →

Record B measures

  • 1 small/regular fillet90 g
  • 1 large fillet135 g
  • 1 whole fish, any size270 g
  • 1 cup135 g
  • 1 oz yields20 g
  • 1 cubic inch17 g
  • Quantity not specified90 g
Scale record B →

USDA source formulation evidence

The listed inputs provide another way to audit the match.

FNDDS includes input-food rows behind each standardized survey-food record. Record A’s leading listed inputs include Fish, catfish, channel, farmed, raw, Breading or batter as ingredient in food, Vegetable oil, NFS, Salt, table. Record B’s include Fish, catfish, channel, farmed, raw, Oil or table fat, NFS, Salt, table. Ingredient-code overlap is 40%, and normalized listed-input-weight variation is 35%.

Record A · 4 input rows

Fish, catfish, fried

  1. Fish, catfish, channel, farmed, rawIngredient code 15234
    64.6% of listed input weight
  2. Breading or batter as ingredient in foodIngredient code 99995000
    24.9% of listed input weight
  3. Vegetable oil, NFSIngredient code 82101000
    9.9% of listed input weight
  4. Salt, tableIngredient code 2047
    0.6% of listed input weight

Record B · 3 input rows

Fish, catfish, grilled

  1. Fish, catfish, channel, farmed, rawIngredient code 15234
    97.6% of listed input weight
  2. Oil or table fat, NFSIngredient code 81200100
    2% of listed input weight
  3. Salt, tableIngredient code 2047
    0.4% of listed input weight

2 shared coded inputs

The largest shared entries include Fish, catfish, channel, farmed, raw, Salt, table. Shared codes can still carry different listed weights.

2 A-only and 1 B-only coded inputs

A-only entries include Breading or batter as ingredient in food, Vegetable oil, NFS. B-only entries include Oil or table fat, NFS.

Important: these weights belong to USDA’s source formulation. Their percentages are shares of the listed input weight, not a reconstructed plate, final cooked yield, visitor serving, ingredient declaration, or estimate of what is visible in a photo.

Choosing the closer record

Match context first; scale second.

  1. 01

    Read both names literally

    Compare cooking method, coating, edible skin or peel, sauce, additions, venue, source form, and food subtype. For this pair, the full A and B descriptions above are the evidence—not shortened search labels.

  2. 02

    Use listed inputs as a check

    If the name still leaves ambiguity, compare the leading and unique source inputs. They can reveal that two near names refer to meaningfully different standardized formulations, but they do not reconstruct your dish.

  3. 03

    Choose an amount for that record

    After choosing A or B, use its own named measure and gram weight. Do not transfer a cup, slice, or “typical amount” from the other record as if the measures were interchangeable.

  4. 04

    Account for missing details

    Brand, current restaurant recipe, cooking oil, drained weight, toppings, substitutions, and unfinished portions may not be captured. A label or weighed recipe can supersede a generic reference when it better matches the actual food.

Limits and responsible interpretation

This is a comparison of records, not a causal study.

The two records come from 2021–2023 FoodData Central Survey Foods data. The nutrient table faithfully compares their published values on the same weight basis. It does not measure two plates prepared at the same time, isolate one ingredient, or estimate the uncertainty around either value.

Several details can change together. Moisture affects concentration per 100 grams. Coating or sauce can add carbohydrate and sodium. Edible skin or fat changes the portion represented. Restaurant, school, frozen, canned, fresh, home-recipe, and ready-to-heat records may use distinct standardized formulations. The source descriptions and input lists help show those differences, but they cannot assign cause.

A higher or lower number is not an overall verdict. Protein, fiber, sodium, energy, fat, micronutrients, preferences, allergies, budget, portion, and an individual’s goals answer different questions. Feast therefore reports directions and magnitudes without applying a universal “healthier” label.

This page is educational and does not diagnose a condition, prescribe a target, or replace advice from a qualified professional. For an allergy, medically directed diet, or strict ingredient limit, use verified ingredient information and guidance appropriate to that situation.

How this page qualified

A page is published only when the pair clears materiality and diversity gates.

Both records must occupy the same USDA survey-food topic and share a close food identity after a controlled vocabulary separates preparation, edible-part, source, claim, crust, and sauce wording. Exact contrast-neutral identities receive priority. Close ingredient or form substitutions can qualify when name overlap remains high and the numerical evidence is material.

For primary nutrients, Feast requires both an absolute and relative difference: at least 20 kcal and 12% for energy; 2 g and 18% for protein or fat; 5 g and 15% for carbohydrate; 1 g and 20% for fiber; 4 g and 20% for sugars; or 100 mg and 20% for sodium. A focused one-nutrient pair also needs a material representative-amount or formulation distinction. Rounding-only pairs are not published.

Unordered FDC IDs define a canonical pair, so reversing A and B cannot create another page. Each source record can appear twice at most, each USDA topic contributes no more than 40 pages, and closely repeated identity families are capped. Those rules produced a selective comparison library rather than every mathematical combination in the corpus.

Read the complete nutrition-page methodology for import, nutrient mapping, portion scaling, Daily Value, and uncertainty rules.